Features:
Easy installation and maintenance
High performance combined with low energy consumption
Intelligent control system to achieve 7 different Wave Movement
Power head has 360 degree rotation
Magnet base with rubber absorption pad and rubber bracket bush
Ceramic shaft for long life and durability
Extra-long cable for ease and comfort of placement
Low voltage, safe, reliable power supply
Suitable for fresh water or saltwater aquariums

Specifications:
Voltage: AC100-240V 50/60Hz
Power: 12-40Watts
Flow Rate: 13000-6500L/Hr
Pump Voltage: 12/24V
Size: 8.5cm x 11.5cm
Power cable – 160cm
Pump control cable – 160cm

Modes of operation
H1, H2, H3: Constant non-variable flow at 13000L/Hr, 9700L/Hr and 6500L/Hr
W1: Pulses which will form a standing wave in your tank. Use S1, S2 and S3 to adjust the speed to 100%, 75% and 50% by pressing the speed/lock button.
W2 and W3: Pump gradually speeds up and slows down incrementally to create a varied flow pattern
Else: a mixed, changing pattern that creates a random flow cycle similar to what you would find in a natural reef.
The thumb wheel is used to adjust the time between the pulses or the varied flow patterns for the W1, W2 and W3 modes.
Feeding mode: Press and hold the mode/feed button for 5 sec to stop the pump. The pump will automatically start again in 10min.
Lock: Press and hold the speed/lock button for 5 sec to lock the controller and prevent accidental changes from occurring.
Light sensor. The light sensor will be on after light goes out and the pump will slow down. To disable the Night mode function, remove the sensor from the control box. The sensor is intended for use with low output lighting or must be positioned away from high output lighting. Sensor is not covered by warranty